News

  • Thread milling pin Radial, arc, tangential approach, which is the most practical?

    Thread milling pin Radial, arc, tangential approach, which is the most practical?

    In order to achieve thread milling, the machine must have three-axis linkage. The helical interpolation is a function of CNC machine tools. The tool controls the tool to realize the helical trajectory. The helical interpolation is formed by the plane circular interpolation and the linear motion p...
    Read more
  • Improvement of Equipment And Quote System in Anebon

    Improvement of Equipment And Quote System in Anebon

    Newly rebuilt bar machine to replace an old worn machine. We are expecting soon which will replace a much older piece. We replaced older multi spindle davenport’s with much newer better condition machines which will be more productive & hold better tolerance. Quote System Improved Computer Ai...
    Read more
  • Introduction to dozens of common stamping procedures

    Introduction to dozens of common stamping procedures

    The cold stamping die process is a metal processing method, which is mainly aimed at metal materials. The material is forced to deform or separate by pressure equipment such as a punch to obtain product parts that meet actual requirements, referred to as stamped parts.     There are many situatio...
    Read more
  • 29 Pieces Of Mechanical CNC Machining Knowledge

    29 Pieces Of Mechanical CNC Machining Knowledge

    1. In CNC machining, the following points should be paid special attention: (1) For current economic CNC lathes in China, ordinary three-phase asynchronous motors are used to achieve stepless speed change through inverters. If there is no mechanical deceleration, the output torque of the spindle ...
    Read more
  • Fifteen important knowledge points of CNC programming CNC machining / CNC cutter

    Fifteen important knowledge points of CNC programming CNC machining / CNC cutter

    1. The most important tool in machining If any tool stops working, it means that production stops. But it doesn’t mean that every tool has the same importance. The tool with the longest cutting time has a greater impact on the production cycle, so on the same premise, more attention should ...
    Read more
  • The difference between CNC machining center, engraving and milling machine and engraving machine

    The difference between CNC machining center, engraving and milling machine and engraving machine

    Engraving and milling machine As the name implies, it can be carved or milled. On the basis of the engraving machine, the spindle and servo motor power are increased, and the bed is subjected to the force, and the spindle is also kept at a high speed. The engraving and milling machine is also dev...
    Read more
  • Working principle and fault handling of CNC machining center

    Working principle and fault handling of CNC machining center

    First, the role of the knife The cutter cylinder is mainly used for the spindle cutter in the machining center machine tool, the CNC milling machine tool automatic or semi-automatic exchange mechanism, and can also be used as the clamping device of the clamp and other mechanisms. The 30# spindle ...
    Read more
  • CNC machining center needs to do these things well for metal cutting

    CNC machining center needs to do these things well for metal cutting

    First, the turning movement and the formed surface Turning movement: In the cutting process, in order to remove excess metal, the workpiece and the tool must be cut relative to each other. The movement of the excess metal on the workpiece by the turning tool on the lathe is called turning motion,...
    Read more
  • There are five ways to process aluminum alloy

    There are five ways to process aluminum alloy

      1. Sand blasting is also called shot blasting   The process of cleaning and roughening metal surfaces by the impact of high-speed sand flow. This method of surface treatment of aluminum parts can make the surface of the workpiece get a certain degree of cleanliness and different roughness,...
    Read more
  • How to calculate the cutting speed and feed speed of CNC machining center?

    How to calculate the cutting speed and feed speed of CNC machining center?

    Cutting speed and feed speed of CNC machining center:   1: spindle speed = 1000vc / π D   2. Maximum cutting speed of general tools (VC): high speed steel 50 m / min; super hard tool 150 m / min; coated tool 250 m / min; ceramic diamond tool 1000 m / min 3 processing alloy steel Brinel...
    Read more
  • Machining accuracy of CNC lathe

    Machining accuracy of CNC lathe

    1. Accuracy of machine tool: if the minimum accuracy of machine tool is 0.01mm, you can’t process products with an accuracy of 0.001mm on the machine tool in any case. 2. Clamping: select appropriate clamping process according to workpiece material, with moderate clamping force. For example...
    Read more
  • 7 steps to operate CNC machining center

    7 steps to operate CNC machining center

    1. Startup preparation   After each start-up or emergency stop reset of the machine tool, first return to the reference zero position of the machine tool (i.e. return to zero), so that the machine tool has a reference position for its subsequent operation.   2. Clamping workpiece   Before th...
    Read more
WhatsApp Online Chat !