ʻO kekahi mau lāʻau lapaʻau maʻamau

Anodizing: ʻo ia ka anodizing o ka alumini.Hoʻohana ia i ke kumu electrochemical e hana i kahi papa o Al2O3 (alumina) kiʻiʻoniʻoni ma ka ʻili o ka alumini a me ke alumini alumini.ʻO ke kiʻiʻoniʻoni oxide nā hiʻohiʻona kūikawā o ka pale, ka hoʻonaninani, ka insulation, ka pale ʻana a me nā mea ʻē aʻe.

 

Kaʻina hana ʻenehana:

Monochrome a me ka gradient: polishing / sandblasting / kaha kiʻi → degreasing → anodizing → neutralization → kala ʻana → sila ʻana → maloʻo

ʻElua kala: ① polishing / sandblasting / kiʻi uea → degreasing → pale → anodizing 1 → anodizing 2 → hole sealing → maloʻo
② hoʻomaʻamaʻa / hoʻoneʻe ʻia / kiʻi → hoʻoheheʻe → anodizing 1 → kalai laser → anodizing 2 → hoʻopaʻa ʻana i ka puka → hoʻomaloʻo.

 

Nā hiʻohiʻona ʻenehana:
1. Hoʻonui i ka ikaika.
2. Hoʻomaopopo i kekahi kala koe keʻokeʻo.
3. Loaʻa i ka nickel free sealing, a hoʻokō i nā koi o ʻEulopa, ʻAmelika Hui Pū ʻIa a me nā ʻāina ʻē aʻe no ka nickel free.

 

Nā pilikia ʻenehana a me nā mea nui no ka hoʻomaikaʻi ʻana:
ʻO ka pae o ka anodizing e pili ana i ke kumukūʻai o ka huahana hope.ʻO ke kī no ka hoʻomaikaʻi ʻana i ka hua e pili ana i ka nui o ka oxidant, ka mahana kūpono a me ka nui o kēia manawa, kahi e koi ai i nā mea hana o nā ʻāpana kūkulu e ʻimi a ʻimi i nā holomua i ke kaʻina hana.
Ed electrophoresis kūlana

 

Electrophoresis: hoʻohana ʻia no ke kila kila, alumini alumini, a me nā mea ʻē aʻe, hiki ke hana i nā huahana i nā kala like ʻole, mālama i ka luster metala, a hoʻonui i ka hana o ka ʻili, me ke kūpaʻa maikaʻi.

Kaʻina hana: pretreatment → electrophoresis → maloʻo

 

Pōmaikaʻi:
1. Waiwai kala;
2. Me ka ʻole o ke ʻano metala, hiki iā ia ke hui pū me ka puhi ʻana i ke one, polishing, uea kaha kiʻi, etc.
3. Hiki i ka hana ʻana i loko o ke kaiapuni wai ke hoʻomaopopo i ka mālama ʻana o ka ʻili o ka hale paʻakikī;
4. ʻenehana makua a me ka hana nui.

Nā pōʻino: ʻo ka hiki ke uhi i nā hemahema he maʻamau, a he kiʻekiʻe nā koi mua o ka mālama ʻana no ka hoʻolei make.

 

 

PVD (hoʻomoe mahu kino)

PVD: pili ia i ke ʻano o ka hana ʻana i ka metala a i ʻole ka hoʻohuihui ʻana me ka hana kūikawā ma ka ʻili o ka mea hana ma ke kaʻina hana kino a i ʻole kemika i ka meteorology.

Kaʻina hana PVD:
Hoʻomaʻemaʻe ma mua o ka PVD → hoʻomaʻemaʻe i loko o ka umu → ka hoʻomaʻemaʻe ʻana a me ka hoʻomaʻemaʻe ion → ka uhi ʻana → ka hoʻoluʻu ʻana i ka umu → ka hoʻoliʻi → ka mālama ʻana i ka AF.

 

Nā hiʻohiʻona ʻenehana;
1. No ke kumu waiwai paʻa ka mea o ka papa waiho.Hoʻohana ʻia nā kumu hoʻomehana like ʻole e hoʻololi i ka mea paʻa i ke ʻano atomic.
2. ʻO ka mānoanoa o ka waihona mai ka nm a μm (10-9 a 10-6m).
3. Loaʻa ʻia ka papa i waiho ʻia ma lalo o ke kūlana vacuum, me ka maʻemaʻe kiʻekiʻe.
4. Ma lalo o ke kūlana o ka plasma wela haʻahaʻa, he kiʻekiʻe ka hana holoʻokoʻa o nā ʻāpana i loko o ka papa deposition a maʻalahi ke hana me ke kinoea hopena e loaʻa ai nā ʻāpana like ʻole.
5. He lahilahi ka papa deposition, hiki ke hoʻomalu i nā ʻāpana kaʻina hana maʻalahi.
6. Hoʻokō ʻia ka deposition ma lalo o ke ʻano o ka vacuum me ka hoʻokuʻu ʻole ʻana o ke kinoea ʻino, nona ka ʻenehana pollution-free.

 

AF hana
Hoʻomaʻamaʻa AF: ʻike ʻia hoʻi ʻo ka anti fingerprint coating treatment.Ma ke ala o ka evaporation, ua uhi ʻia kahi uhi ma luna o ka ʻili seramika, kahi mea e paʻakikī ai ka ʻili seramika e hana i nā manamana lima a maikaʻi ke pale ʻana i ka lole.

 

Kaʻina hana lapaʻau AF:

ʻO ka nānā ʻana i ke ʻano e hiki mai ana → holoi ʻana i ka huahana → hoʻomaʻemaʻe ion → ka uhi ʻana o AF → ka ʻai ʻana → ka nānā like ʻana o ka wai → ka nānā ʻana i ka uhi ʻana → ka hoʻāʻo ʻana i ka kihi kulu wai.

 

Nā hiʻohiʻona ʻenehana:
1. Antifouling: pale i nā manamana lima a me nā ʻaila ʻaila mai ka hoʻopili ʻana a holoi maʻalahi;
2. Anti scratch: ʻili maʻemaʻe, ʻoluʻolu lima manaʻo, ʻaʻole maʻalahi e ʻohi;
3. Kiʻiʻoniʻoni lahilahi: maikaʻi ka hana optical, me ka hoʻololi ʻole i ke ʻano kumu;
4. Wear resistance: me ka pale lole maoli

 

Aluminum Cnc Mīkini	ʻO nā ʻāpana ʻokoʻa Cnc	Cnc Huli Milling
ʻO nā ʻāpana mīkini Cnc Aluminum	Ka Huli a me ka Milling Cnc	Cnc Milling Stainless Steel
Mīkini Aluminum	ʻO nā mea hoʻololi Cnc	ʻOihana Milling Cnc Kina

 

www.anebon.com